GEPRC TAKER F722 BLS 60A V2 STACK｜飛控電變飛塔

GEPRC TAKER F722 BLS 60A V2 STACK｜飛控電變飛塔

GEPRC 官方飛控電變飛塔，已依台灣顧客使用習慣整理名稱、分類與付款方式。下單前請確認規格、接頭、頻段、極化方向、電壓及相關法規需求。

Features

Use mainstream STM32F722 chip

Equipped with the latest 42688-P gyroscope

16M black box storage

Integrated LC filter

Upgrade type-C USB interface

Directly plugged into the DJI Air Unit

With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky

Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably

[email protected]

+ 5V@3A dual independent BEC

Specifications

GEP-F722-HD v2 Flight Controller

MCU：STM32F722

IMU：ICM42688-P(SPI)

Air Unit Connection：Direct plugging into DJI Air Unit

Black Box：16M onboard

USB Interface：Type-C

OSD：BetaFlight OSD w/ AT7456E chip

BEC：5V@3A,

[email protected]

dual BEC

Firmware Target：GEPRCF722

Size：36.85×36.85mm, hole 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

Input Voltage：3-6S LiPo

UART：5

Power Filter：Integrated LC filter

Weight：8.1g

TAKER H60_BLS 60A 4IN1 ESC

Input Voltage: 3-6S Lipo

Ammeter: Support

Continue Current：60A

Burst Current：65A（5 second）

Support Protocol: Dshot 150/300/600

Size：42×45.7mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

Weight: 14.9g

Target: B_X_30

Includes

1 x Flight Controller

1 x ESC

1 x Capacitor

1 x DJI Air Unit Adapter Cable

1 x Flight Controller Adapter Cable

1 x XT60 Power cable

4 x M3*30 Screws

4 x M3*25 Screws

8 x Nylon nuts

8 x Silicone grommets

2 x sh1.0 4pinsilicone cable

1 x Camera connection cable