GEPRC MARK4 HD GPS FPV Drone

GEPRC MARK4 HD GPS FPV Drone|FPV 穿越機

receiver-option: PNP(Without Receiver)/motors: 2306.5 1850kv 6S / 訂金預購
$5,734.00
跳到商品資訊
GEPRC MARK4 HD GPS FPV Drone

GEPRC MARK4 HD GPS FPV Drone|FPV 穿越機

$5,734.00
規格
付款方式

商品價格與庫存以實際確認為準;如遇缺貨或價格異常,我們將主動聯絡並提供退款或取消訂單。

GEPRC MARK4 HD GPS FPV Drone|FPV 穿越機

GEPRC 官方FPV 穿越機,已依台灣顧客使用習慣整理名稱、分類與付款方式。下單前請確認規格、接頭、頻段、極化方向、電壓及相關法規需求。

https://www.youtube.com/watch?v=bioyzUVnm8E&fbclid=IwAR0zoUHSRIGA3dCShdCKjXXc-ajOoKAzx1CLzRml46fSMupKOcTVOjL4Ym0

Introduction:

Today, The latest Mark4 HD GPS has finally launched. After abundant of time testing by GEPRC team, so happy to see it. Mark4 HD GPS is mainly used for daily freestyle flying or taking HD video of long-distance flight. Using the latest GEPRC Span F405 HD flight control system, Combined with Caddx Polar Vista HD transmission system, it can bring extreme stable experience with delicate feel.

Mark4 HD GPS has an independent GPS seat with a GPS module. When the signal lost or VTX losing control, Rescue mode of betaflight can be activated (in emergency, the FPV should fly back to the approximate position of the base; When the signal is obtained again, You should operate the FPV and let it land manually.) ,The Rescue mode cannot land automatically.

In terms of POWER, it is equipped with the new upgraded G2306.5 motor, There are two versions : 4S and 6S . The 4S uses 2450kv and the 6S uses 1850kv. The flight time of 4S is about 40 seconds shorter than 6S.

Mark4 HD GPS is professionally assembled and tested by GEPRC team, The frame has optimum structure quality, durability, and stability.

It’s incredible how fantastic freestyle

Features:

Ultra-lightweight design

Integrated GPS, able to return to base in emergency

Caddx Polar Vista HD FPV(Low Latency Mode (720p 120fps): 21-28ms)

Full 3K Carbon Fiber

Black Box: 8Mb onboard flash memory.

GR2306.5 Motors

A little props in view

Full Soft Mounted FC System: Provides a clean operating environment for gyro.

Exquisite Assembly Process: Eliminate any potential installation problems.

Weight:392g without battery

Receiver:PNP(DJI receiver) / Frsky R-XSR / Frsky XM+ / TBS Nano RX

Specifications:

Frame:

MARK4 HD GPS Frame kits(Improved version)

Full 3K Carbon Fiber

Motor to motor:225mm

Size:138*176mm

Mounting Holes: 30.5*30.5mm/20*20mm

Arms plate : 5mm

Side plate : 2.5mm

Top plate : 2.5mm

Bottom plate : 2.5mm

Protect plate : 2mm

Power System:

4S Battery

Motors:

GR2306.5 2450KV

Battery:4S 1300~1550mAh

6S Battery:

Motors

:

GR2306.5 1850KV

Battery:6S 1050~1300mAh

Propeller

:

GEPRC G5x4.3×3

Electronic System

Flight Controller:

GEP-F405-HD

MCU: STM32F405

Gyro: 6-Axis

DJI FPV Air Unit Supported.

BlackBox: 16Mb onboard Flash

Type-C USB interface

OSD: BetaFlight OSD w/ AT7456E chip

Baro:BMP280

BEC Output: 5V,9V BEC

Integrated LC Filter

Firmware target:GEPRCF405

Size: 36x36mm board, φ4mm with Grommets φ3mm

6x UART

BL32 50A ESC 4IN1

:

MCU: STM32FO51K86(32bit 48mHz)

Continuous Current: 50A

Peak Current: 55A (5S)

Current sensor: YES

Telemetry:Supported

Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot

Firmware Version:GEPRC-BL32-4IN1

Input Voltage: 3-6S Lipo

BLHeliSuite download:

http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file

You might need the following equipment to fly

Remote control: You can choose: Frsky X9d or something like that

Goggle: DJI HD Goggle Only

Battery: The recommends using the 4S 1300mAh battery.

Include:

1x MARK4 HD GPS Quadcopter

Shop The Full Collection

(PRE-ORDER) TBS MAMBO – FPV RC RADIO DRONE CONTROLLER|遙控器

1S 1000mAh 80C LiHV 高壓鋰電池 (4入組) | Nexowing

Amass 3.5/4.0mm 鍍金香蕉插頭|馬達電變用

BETAFPV LAVA Ⅱ 280-680mAh 1S鋰電池