GEP-STABLE V2 F4 30A｜飛控電變飛塔

GEP-STABLE V2 F4 30A｜飛控電變飛塔

GEPRC 官方飛控電變飛塔，已依台灣顧客使用習慣整理名稱、分類與付款方式。下單前請確認規格、接頭、頻段、極化方向、電壓及相關法規需求。

Summary:

After four months of hard work, DUAL ICM 20689 gyroscope both work at the same time,The new F4 Mini 20X20mm Important to release.

There are three versions. We strongly recommend the F7 Dual ICM20689 version, which is a one-off improvement.

Version as follows，STABLE V2 F4 30A(BLS 30A+F4+5.8G 600mw ),STABLE V2 F4 BL32 30A (BL32 35A+F4+5.8g 600mw)，STABLE PRO F7 DUAL BL32 35A (BL32 35A+F7 DUAL ICM20689+5.8g 600mw), Pilots can choose as needed.

All three versions have a common feature that maximizes the minimalist layout structure, Highly integrated FPV required functions, perfect clean video output.

Innovative soft damping design to reduce flight control and gyroscope noise and reduce motor heat output

Manual:

GEPRC-STABLE-V2-F4-MANUAL-V1_0.pdf

STABLE V2 F4 Flight Controller Specs

：

Model:STABLE F4 30A

MCU: F405

IMU: MPU6000 gyro/accelerometer (SPI)

OSD: BetaFlight OSD w/ AT7456E chip

Baro:NO

BEC Output: 5V@3A

Integrated LC Filter

Firmware target: OmnibusF4SD

Size: 26x26mm board, 20mm mounting holes (M2)

STABLE V2 F4 ESC 2-5S 4in1 Specs

：

Input:2-5s lipo

Constant:30Amps

Burst:35Amps

Dimensions:31*31mm(including the power pads)

Mounting Holes:20*20mm,M2

Supports Dshot600,Proshot,Oneshot,Multishot

Current meter: Yes

Target: G_H_30

STABLE F4 5.8g 600mW VTX Specs:

Input voltage: 5V

Channel: 48

Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 600mW

Size: 24 * 26 mm

Mounting Holes Dimension: 20mm x 20mm

Connector type: MMCX Connector

BEC Output：5V/1A for Camera of FC

Weight: 2.3g

Traditional button

IRC Tramp protocol

Features:

F7 Support both dual ICM20689 gyroscopes to work simultaneously, Exquisite and perfect flight experience

Innovative soft damping design, suitable for most frame, ensures flight control and gyroscope without noise

Simple installation method, compact space

STM32 F405 MCU or STM32F722RET6 MCU

Newly upgraded BLheli_32 ESC, high-speed operation, 35A stable working voltage, maximum 45A (3 seconds)

Support 2-6s battery and current meter

Support blackbox and use 32M on-board flash storage

8g VTX Support IRC protocol, PIT/ 25/100/200/600mw adjustable, 48 frequency

Mounting Holes: 20x20mm(M2)

Size: 26x26x21mm

Weight 16.5g (Including Wire and screws)

Include：

– 1 x F4 Flight Controller

– 1 x BLheli_s 30A 2-5S ESC

– 1 x 5.8g 600mW VTX

– 1 x Antenna

– 1 x Capacitance

– 5 x cable set

– 4 x M2*28mm screw

– 16 x Soft silicone