GEPRC TAKER F405 BLS 100A 8S STACK｜Flight Controller ESC Stack

GEPRC TAKER F405 BLS 100A 8S STACK｜Flight Controller ESC Stack

GEPRC official flight controller ESC stack. Names, categories, and payment methods have been adjusted for Taiwanese customer preferences. Please confirm specifications, connectors, frequency bands, polarization, voltage, and relevant regulatory requirements before placing an order.

Changelog

Oct 20, 2025:

The flight control firmware has been changed to: [GEPRCF405_8S]. If you continue to use the [GEPRCF405_BT_HD] firmware for burning, you need to enter the following command in the CLI after burning the firmware:

resource SERIAL_TX 11 NONE

resource SERIAL_RX 11 NONE

set pinio_config = 1,1,1,1

set pinio_box = 32,41,255,255

save

Features

Use mainstream STM32F405 chip

Equipped with the latest 42688-P gyroscope

16M black box storage

Integrated LC filter

Upgrade type-C USB interface

Directly plugged into the DJI Air Unit

With TAKER H100_8S_BLS 100A 4IN1 ESC, Dual MOS, high current, silky flight

Supports 8S Lipo battery

Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably

12V@3A + 5V@3A dual independent BEC

Specifications

GEP-F405-8S Flight Controller

MCU: STM32F405

IMU: ICM42688-P(SPI)

Air Unit Connection: Direct plugging into DJI Air Unit

Black Box: 16M onboard

Barometer: support

Motor outputs: M1-M8

USB Interface: Type-C

OSD: BetaFlight OSD w/ AT7456E chip

BEC: 5V@3A,12V@3A dual BEC

Firmware Target: GEPRCF405_8S

Size: 37x37mm

Mounting: 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle

Input Voltage: 3-8S LiPo

UART: 6 UARTs

Power Filter: Integrated LC filter

Weight: 8.3g

TAKER H100_8S_BLS 100A 4IN1 ESC

Input Voltage: 3-8S Lipo

Ammeter: Support

Calibration value: 200

Continue Current: 100A

Burst Current: 105A（5 second）

Support Protocol: Dshot 150/300/600

Size: 56.3*61.1mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

Weight: 28.8g

Target: B_X_3

Includes

1 x GEP-F405-8S Flight Controller

1 x TAKER H100_8S_BLS 100A 4IN1 ESC

1 x Electrolytic capacitor(50V 4700uF)

1 x DJI connection cable(SH1.0 6pin 100mm)

2 x FC adapter cable(SH1.0 8pin 30mm)

1 x Receiver silicone cable(SH1.0 4pin 150mm)

1 x Camera connection cable(SH1.0-SH1.25 3pin 135mm)

1 x VTX connection cable(SH1.0 4pin-6pin 100mm)

1 x XT90 battery plug

1 x Red and black power cable(10AWG 240mm)

4 x M3*30 screws

4 x M3*25 screws

8 x Nylon nuts(M3)

12 x Silicone anti-shake pads(M3)