GEPRC TAKER H743 BT 32Bit 65A Stack

Product Summary

The TAKER H743 BT 32Bit 65A STACK is the latest flight control system developed by the GEPRC team. It is equipped with a high-performance STM32H743VIH6 chip, featuring a Cortex-M7 core and a main frequency of up to 480MHz, making it ideal for both racing and freestyle flying.

It adopts a dual gyroscope configuration with MPU6000 and ICM42688-P, ensuring precise and delicate control. It includes a built-in 512MB large-capacity black box, an integrated barometer, and provides 8 motor output ports compatible with X8 models. The system supports multiple firmwares such as Betaflight, INAV, and Ardupilot, offering high flexibility. It features independent dual BEC (5V@3A + 12V@2.5A) for stable power supply. Paired with the TAKER H65 8S 65A ESC, it delivers an extremely smooth flight experience.

Product Features

1. Uses a high-performance STM32H743 as the main control chip.

2. Equipped with MPU6000 & 42688-P dual gyroscopes.

3. 512MB ultra-large capacity black box storage.

4. Supports Bluetooth wireless tuning (refer to the update notice above).

5. Plug-and-play design, no complex soldering required.

6. Integrated professional-grade barometer.

7. Provides 7 UART serial ports.

8. Independent dual BEC: 12V@2.5A and 5V@3A.

9. Supports multiple mainstream open-source firmwares.

10. Equipped with TAKER H65 8S 32Bit 65A 4-in-1 ESC.

Technical Specifications

Flight Controller (FC): TAKER H743 BT

• MCU: STM32H743

• IMU: MPU6000 + ICM42688-P (Dual Gyroscope)

• Video Transmission Connection: Direct plug-in for DJI Air Unit

• Black Box: Onboard 512MB

• Bluetooth/Barometer: Supported

• USB Port: Type-C

• OSD: BetaFlight OSD (AT7456E chip)

• BEC Output: 5V@3A, 12V@2.5A dual output

• Firmware Target: GEPRC_TAKER_H743

• Dimensions: 38.5×38.5mm (Mounting holes 30.5×30.5mm)

• Input Voltage: 3-6S LiPo

• UART Serial Ports: 7 sets (UART3 fixed for Bluetooth)

• Weight: 8.4g (Built-in LC filter)

Electronic Speed Controller (ESC): TAKER H65_8S 65A

• Input Voltage: 3-8S Lipo (Note: Only 3-6S when assembled with FC)

• Ammeter: Supported

• Continuous Current: 65A / Burst Current: 70A (5 seconds)

• Supported Protocols: Dshot 150/300/600

• Weight: 15.8g (Using silicone damping ring with 3mm hole diameter)

• Firmware Target: GEPRC_F4_4in1

Package Includes

• 1 x TAKER H743 BT Flight Controller

• 1 x TAKER H65 65A 4-in-1 ESC

• 1 x Electrolytic Capacitor (50V 1000uF)

• 1 x DJI Cable (SH1.0 6pin 100mm)

• 1 x FC Accessory Cable (SH1.0 8pin 30mm)

• 1 x Receiver Silicone Cable (SH1.0 4pin 150mm)

• 1 x Camera Connection Cable / 1 x VTX Connection Cable

• 1 x XT60 Power Cable (12AWG)

• Screw Accessory Pack (including M3 screws, nylon nuts, silicone damping pads)

• Screwdriver Tool Set

⚠️ Important Update Regarding Bluetooth Functionality

February 25, 2026: Due to temporary hardware adjustments, the current batch of flight control stacks does not support Bluetooth wireless tuning functionality. Rest assured, the flight controller (FC) and electronic speed controller (ESC) maintain perfect performance in all other aspects. The reinstatement of this feature will be announced separately. We apologize for any inconvenience caused.