{"product_id":"geprc-taker-f722-bl32-e55a-se-stack-飛控電變飛塔","title":"GEPRC TAKER F722 BL32 E55A SE STACK｜飛控電變飛塔","description":"\u003cp\u003e\u003cstrong\u003eGEPRC TAKER F722 BL32 E55A SE STACK｜飛控電變飛塔\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGEPRC 官方飛控電變飛塔，已依台灣顧客使用習慣整理名稱、分類與付款方式。下單前請確認規格、接頭、頻段、極化方向、電壓及相關法規需求。\u003c\/p\u003e\u003cp\u003eSummary\u003c\/p\u003e\u003cp\u003eThe GEPRC TAKER F722 E55A SE stack is a high-performance stack system aimed at racing. It adopts the mainstream F722 controller, the stable and reliable ICM42688-P gyroscope, and an integrated 32Mb flash. The overall performance is reliable and stable. The wiring of the flight controller supports welding and SH1.0 terminal plug-and-play, which is convenient for installation and application.\u003c\/p\u003e\u003cp\u003eThe TAKER E55_96K BL32 4IN1 ESC 55A uses metal-encapsulated MOS tubes with a measured continuous overcurrent of 50A and an instantaneous current of 55A, fully meeting the requirements of professional drone racing.\u003c\/p\u003e\u003cp\u003eAll stacks mounting hole size is 25.5 x 25.5MM, which is compatible with most frames in the market for installing AIO flight controllers. The stack combination can help dissipate heat from the main controller and MOS tubes.\u003c\/p\u003e\u003cp\u003eFeatures\u003c\/p\u003e\u003cp\u003eThe new TAKER series, a high-performance stack system, adopts a 2306.5 1350KV motor and 7.5-inch drone for testing and can operate stably.\u003c\/p\u003e\u003cp\u003eAdpots mainstream F722 main controller with ICM42688-P gyroscope.\u003c\/p\u003e\u003cp\u003e32Mb black box storage.\u003c\/p\u003e\u003cp\u003eSupport receiver, analog camera, and support plug-in of the DJI Air Unit directly.\u003c\/p\u003e\u003cp\u003eThe design of 10V 2A+5V 2.5A dual-channel independent BEC.\u003c\/p\u003e\u003cp\u003eThe customized 25.5mm x 25.5mm mounting holes are compatible with most of the AIO frames in the market.\u003c\/p\u003e\u003cp\u003eTAKER E55_96K BL32 4IN1 ESC 55A metal package MOS tube ESC possesses a better heat dissipation effect and performance.\u003c\/p\u003e\u003cp\u003eSpecifications\u003c\/p\u003e\u003cp\u003eTAKER F722 SE FC\u003c\/p\u003e\u003cp\u003eMCU: STM32F722RET6\u003c\/p\u003e\u003cp\u003eIMU: ICM42688-P\u003c\/p\u003e\u003cp\u003eBlack Box: 32Mb Flash\u003c\/p\u003e\u003cp\u003eUSB: Type-C\u003c\/p\u003e\u003cp\u003eOSD: BetaFlight OSD w \/ AT7456E chip\u003c\/p\u003e\u003cp\u003eBEC Output:\u003c\/p\u003e\u003cp\u003e[email protected]\u003c\/p\u003e\u003cp\u003e, 10V@2A dual-output BEC\u003c\/p\u003e\u003cp\u003eFirmware Target: TAKERF722SE\u003c\/p\u003e\u003cp\u003eDimension: 31.7×31.5mm\u003c\/p\u003e\u003cp\u003eMounting Hole Sizes: 25.5×25.5mm, mounting hole size is φ4mm, use vibration reduction silicone to transform the fixing screws into 3mm or 2mm.\u003c\/p\u003e\u003cp\u003eInput Voltage: 7.4V – 25.2V (LiPo 2-6S)\u003c\/p\u003e\u003cp\u003eUART: 6 UARTS (for Uart 6 ESC only)\u003c\/p\u003e\u003cp\u003ePower Filter: Integrated LC filter\u003c\/p\u003e\u003cp\u003eWeight: 6.0g\u003c\/p\u003e\u003cp\u003eTAKER E55_96K BL32 4IN1 ESC 55A\u003c\/p\u003e\u003cp\u003eInput Voltage: 7.4V-25.2V（LiPo 2-6S)\u003c\/p\u003e\u003cp\u003eGalvanometer: Support\u003c\/p\u003e\u003cp\u003ePWM Refresh Frenquency: 24K-96K\u003c\/p\u003e\u003cp\u003eContinuous Current: 55A\u003c\/p\u003e\u003cp\u003eBurst Current: 60A (5s)\u003c\/p\u003e\u003cp\u003eTelemetry: Support\u003c\/p\u003e\u003cp\u003eSupport Protocol: Oneshot125 \/ Oneshot42 \/ Mulishot modes Dshot 150\/300\/600\u003c\/p\u003e\u003cp\u003eFirmware Target: ST_G0_05\u003c\/p\u003e\u003cp\u003eWeight: 9.6g\u003c\/p\u003e\u003cp\u003eIncludes\u003c\/p\u003e\u003cp\u003e1 x Flight control\u003c\/p\u003e\u003cp\u003e1 x ESC\u003c\/p\u003e\u003cp\u003e1 x 35V 470uf capacitor\u003c\/p\u003e\u003cp\u003e1 x XT60 power cord\u003c\/p\u003e\u003cp\u003e1 x 8pin flight controller ESC cable\u003c\/p\u003e\u003cp\u003e4 x M3*22 screws\u003c\/p\u003e\u003cp\u003e6 x M3 anti-slip nuts\u003c\/p\u003e\u003cp\u003e12 x 4 convert to 3mm vibration-reduction silicone\u003c\/p\u003e\u003cp\u003e12 x 4 convert to 2mm vibration-reduction silicone\u003c\/p\u003e\u003cp\u003e1 x 65mm camera lens cable\u003c\/p\u003e\u003cp\u003e1 x 25mm camera lens cable\u003c\/p\u003e\u003cp\u003e1 x Receiver cable\u003c\/p\u003e\u003cp\u003e1 x DJI Air Unit Cable connector\u003c\/p\u003e","brand":"GEPRC","offers":[{"title":"全額付款","offer_id":46970315178182,"sku":"GP105892-FULL","price":4000.0,"currency_code":"TWD","in_stock":false},{"title":"訂金預購","offer_id":46970315210950,"sku":"GP105892-DEP","price":1334.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2272\/6598\/files\/1_DeMain_0000-5_14140f4c-ff4e-4d94-950a-0c8c76ce68f2.jpg?v=1787576930","url":"https:\/\/nexowing.com\/products\/geprc-taker-f722-bl32-e55a-se-stack-%e9%a3%9b%e6%8e%a7%e9%9b%bb%e8%ae%8a%e9%a3%9b%e5%a1%94","provider":"Nexowing","version":"1.0","type":"link"}